DIFALCO - DIF435 - "ELIMINATOR" DRAGTROLLER W/CHOKE W/TRANSBRAKE (slot car)
Product ID : DIF435
The selected item is out of stock, please select a different item or combination
DIF435 - This new model will be great for all types of racing with our new electronic choke. A 12 position switch is used to fine tune the top end speed of your drag car. These 12 closely spaced power levels are mated with a 3 position switch used to select low, medium or high range for a total of 36 power levels. Unlike other designs that use micro switches to control power to the car we use wiper bands to gradually apply power for a smoother take off with less glue. The only thing that could make the new DD430 drag controller even more versatile is adding a transbrake! Large size micro switch, with a nice strong snap, is mounted to the rear edge of the controller right under your thumb. Just depress the micro, pull the trigger and get ready to blast off.
Products You May Like
Pro external resistor controllers now feature an all new red printed circuit board control module with heavy duty brass wiper contacts in an all new layout. New supersize triple plated silver power contact, built in emergency fuse bypass, 2 ohm variable brake rheostat with off position, 100 watt resistor, 10 amp brake line fuse, 18GA and 10GA silicone leadwire, Parma handle and stainless steel hardware are standard. The computer routed module has 3 auxiliary mounting holes to install a choke bypass switch or other options.